Diagnostic tab – LevelOne PLI-3410 User Manual

Page 42

Advertising
background image

42

Diagnostic Tab


The Diagnostics Tab screen shows System information and a history of all remote devices seen over
a period of time. This screen is available for OEM/ODM Customization. The Upper panel shows
technical data concerning software and hardware present on the host computer which were used for
communication via HomePlug device on the PowerLine network.

The data includes the following:
• Operating System Platform/Version
• Host Network Name
• MAC Address of all NICs (Network interface card) connected to the host
• Identify versions of all Driver DLLs and Libraries used (NDIS) and optionally
• MAC Firmware Version
• MAC addresses of all devices connected locally to the host
• Version of the Configuration Utility
• Microprocessor


The Lower panel contains a history of all remote devices seen on the computer over a certain period
of time. All devices that were on the PowerLine network are listed here along with a few other
parameters. Devices that are active on the current logical network will show a transmission rate in
the Rate column; devices on other networks, or devices that may no longer exist are shown with a
“?” in the Rate column. The following remote device information is available from the diagnostics
screen:
• Device Alias Name
• Device MAC Address
• Device Password

Advertising