LevelOne PLI-3410 - Manual (Page 11)

1
1
Reset Button Press this button 1~3 second(s) to reset device to factory default settings.
Ethernet Port Connect the HomePlug AV device with an Ethernet device (e.g. computer,
router, hub/switch, IP pone, IPTV set-top-
box, gaming consoles…), using the
RJ-45 Ethernet cable included.
Power Plug / AC
Power Cord Plug into an AC outlet for power supply and to build a PowerLine network
with other HomePlug AV devices.
Clip Socket Install the clip into this socket.
Note: Please DO NOT remove or disassemble the socket clip frequently
as this may cause serious damage on your HomePlug AV device.