LevelOne MSL-3S79 - Manual (Page 35)

29
Port Information interface
60B
6.5.3 Port Control
In Port configuration, user can view every port status that depended on user setting
and the negotiation result.
1. Port: select the port that user wants to configure.
2. State: Current port status. The port can be set to disable or enable mode. If the
port setting is disabled, it will not receive or transmit any packet.
3. Auto Negotiation: enable or disable auto negotiation
4. Speed: when Auto Negotiation is disabled, user can select the port link speed.
5. Duplex: set full-duplex or half-duplex mode of the port.
6. Flow Control: set flow control function is Enable or Disable. The default value is
Enable.
7. Jumbo: Assign the Jumbo frame size. The maximum is 10K bytes.
8. Click Apply .