LevelOne MSL-3S79 - Manual (Page 58)

52
User can add static MAC address in switch MAC table.
1. MAC Address Port VLAN ID: list the MAC Address Port. VLAN ID
2. MAC Address: Specify the destination MAC address to add to the address table.
3. Port.No: pull down the selection menu to select the port number.
4. Vid: enter the Vid of the MAC address, it has to be between 1 to 4094.
5. Click Add .
6. If user wants to delete the MAC address from filtering table, select the MAC
address and click Delete .
104B
6.7.2.2 Filter MAC Address Table
MAC address filtering allows the switch to drop unwanted traffic. Traffic is filtered
based on the destination addresses. For example, if your network is congested
because of high utilization from one MAC address, you can filter all traffic transmitted
to that MAC address, restoring network flow while you troubleshoot the problem.
MAC Filtering interface
1. MAC Address: Enter the MAC address that user wants to filter.
2. Vid: enter the Vid of the MAC address, it has to be between 1 to 4094.
3. Click Add .