LevelOne MSL-3S79 - Manual (Page 50)

44
DSCP Configuration interface
68B
6.6.5 SNTP
User can configure the SNTP (Simple Network Time Protocol) settings. The SNTP
allows user to synchronize switch clocks in the Internet.
1. SNTP Server Link Status: Display the link status of SNTP server.
2. Switch Current Time: Display the current time of the switch.
3. SNTP Client: Enable or disable SNTP function. When it is enabled, user can
assign the domain name or IP address of SNTP server for getting the time from
SNTP server.
4. UTC Timezone: Set the switch location time zone.
5. SNTP Period: The SNTP period is used for sending synchronizing packets
periodically.
6. SNTP Sever IP Address: Assign the SNTP server IP address.
7. Click Apply .