LiftMaster LA400 Residential DC Linear Gate Operator - Manual (Page 18)

17
SECURE GATE BRACKET TO GATE
The gate operator (arm) must be level.
Some installations may require additional reinforcement be installed on the gate.
Secure the gate operator to the gate using hardware (not provided).
Manually move the gate to verify that it opens and closes fully.
Drill holes in gate (or reinforcement, if necessary) that are large enough for the
gate bracket mounting hardware.
1
Operator
Hex Nut
Lock Washer
Flat Washer
Gate Bracket
Hex Bolt
1
2
2
3
3
OR
OR
Reinforcement Area
Angle Iron
Wood
Flat Bar
WARNING SIGN PLACEMENT
Moving Gate Can Cause
Injury or Death
KEEP CLEAR! Gate may move at any
time without prior warning.
Do not let children operate the gate or
play in the gate area.
This entrance is for vehicles only
Pedestrians must use separate entrance
Fence Gate Post
Gate
Inside Property
Gate Travel
Path
Warning signs MUST be installed on both sides of the gate and in plain view.
Fasten warning signs to the gate with cable ties.
1
1
INSTALLATION
» SECURE GATE BRACKET TO GATE + WARNING SIGN PLACEMENT
If installing a 2nd operator, repeat the previous
installation steps for the second gate before proceeding
to the next page.
Welder (Optional)