LiftMaster LA400 Residential DC Linear Gate Operator - Manual (Page 47)

46
To order visit www.liftmaster.com
ACCESSORIES
1-Button Station:
Steel enclosure wired station will allow for a Open,
Close, Stop command of the gate.
377LM
02101
370LM
373LM
Gate Solenoid Lock:
Heavy all steel construction. Fail safe operation keeps
gate locked if power is lost. Can be welded onto gate or
post. 12 Vdc operation, solenoid-activated release. Can
be released in case of an emergency. Requires separate
power supply (Model ARMP5). GC824-12
LM202 Vehicle Exit Sensor:
One piece outdoor buried vehicle motion detector with
sensing probe is housed in a small relay type housing
so it is easy to integrate with gate, providing for free
exit only.
3-Button SECURITY✚ ® Remote Control :
Includes visor clip.
SECURITY✚ ® Keyless Entry :
Enables homeowner to operate gate by entering a
password on a specially designed keypad.
3-Button Mini-Remote Control with
SECURITY✚
® :
With key ring and fastening strip.
OPEN
86LM Remote Antenna Mounting Kit:
Kit contains antenna bracket and 15 feet (4.6 m) of
cable. Recommended for increasing the effective range
of remote controls.
MG1300 Magnetic Gate Lock:
Outdoor magnetic lock, transformer, junction box,
mounting plate and hardware.
50-19503 Push-to-Open Bracket
Used to allow the gate operator to push the gate open.
CPS-LN4 Commercial Protector System ®
(Direct Connect):
Maximum range is 45 feet (13.7 m) 24 V. Includes
mounting hardware.
29-NP712 7 AH/12 Vdc Gate Access System Battery:
The gate access system battery is a replacement battery
for the operator. The model LA400 requires two
batteries.