LiftMaster LA400 Residential DC Linear Gate Operator - Manual (Page 22)

INSTALLATION
» LARGE METAL CONTROL BOX (XLM)
21
WIRING
Select the knock out in the bottom of the control box based on the application
requirements.
Depending on the voltage and application the 120 Vac access panel may be
removed to access the wiring.
Connect two 7AH batteries, purchased separately. See Accessories page.
IMPORTANT NOTE: There are two receptacles located inside the control box. One
of the receptacles is for the control board power supply. The second receptacle can
be used to power up additional gate operator accessories.
CLOSE
PHOTO
FORCE TIMER TO CLOSE
OFF MAX
SHADOW INTERRUPT CHGR
OVLD CTRL
LOOP
INPUTS GATE 2
ACCESSORY POWER
ALARM
GATE 1
MAGR SOL
GR WH YL BL RD
BR
GR WH YL BL RD
BR 12 V
GATE 2
SET
OPEN
LIMIT SET CLOSE
LIMIT LEARN
LIMITS GATE 1
LEARN
XMITTER LOCK / ON OFF
PWR
OFF MAX
SINGLE BUTTON
BIPA RT DELAY LOCK GND
CLOSE
EDGE
OFF ON AUTO OPEN LOW BATT
OPEN EDGE/ PHOTO
OPEN
PHOTO
AC PWR
/SOLAR
CONTROL INPUTS OPEN SINGLE BUTTON RESET STOP CTRL PWR CTRL PWR
1
2
3
2
The XLM control box wires the same as the standard
control box. Follow all instructions for the standard
control box. The illustrations show the standard control
box, not the XLM control box.
120 Vac ONLY
1