ARCHOS AV420 - Manual (Page 15)

15
Pre-record Screen
1. Select VideoCorder on the main
menu screen. In the pre-record screen,
you should see movement on the
sound level bar indicating that sound
will be recorded. Adjust the sound level
by clicking the LEFT/RIGHT buttons.
Before starting the recording, you can
adjust the recording parameters via
the middle function button Settings.
Hold down on Scheduler button for
3 seconds to hide the overlaid screen
info.
Setup Parameters
2. In most situations, the video
recording will work fine without your
having to adjust the settings. However,
by clicking on the middle function
button, you have access to a number
of parameters that you can change
before you start the recording. See the
table below for descriptions. Click any
function button to return to the pre-
record screen.
During Recording
3. Click on the PLAY/PAUSE  button
to start the recording. While recording,
you will see the length of time of the
recording in the top left of the screen
as well as a red “record” indicator. Click
on the PLAY/PAUSE  button again to
pause the recording. Click on the STOP/
ESC  button to stop the recording.
The AV300 will take a few seconds to
complete the proper saving of the .AVI
video file.
5
VIDEO - Recording Video Files