ARCHOS AV420 - Manual (Page 47)

47
Desired audio section
00:00 (0min 0sec) 12:15 21:05 33:22
To keep just this section (cropping it), you will:
• locate this file from the Browser mode
• Select
Edit from the File menu in order to enter the edit mode
• In the edit mode, set the cut-IN point (12:15 in our example)
• Next, set the cut-OUT point (21:05 in our example)
• Save the edit
Highlight the file to edit and select Edit
from the file menu. Only files which have
been created with the AV400 recording
function will show Edit in the file menu.
Files created from CDs or downloaded
cannot be edited. Once you enter the
edit mode, the audio file will play in a
continuous loop so that you will be able
to hear how your edit sounds.
Use the fast-reverse and fast-forward
buttons (LEFT/RIGHT buttons) to locate
the points you want the new file to
start and end. These are the cut-IN
and cut-OUT points. Once you have set
these points, you can save the edit. In
this example, a new file VOICE_01_Edit.
mp3 will be made. Your original file is
left untouched. You will notice that your
Cut-IN and Cut-OUT times are marked
just above the file name.