ARCHOS AV420 - Manual (Page 61)

61
The Sound Parameters
Parameter Description
Built-in Speaker Turns on and off the built-in speaker. Same as long press on
the center function button.
Volume 00 - 99
Bass 10 levels. Decreases or Increases the low frequencies.
Treble 10 levels. Decreases or Increases the high frequencies.
Balance 10 levels. Favors the right or left channel of the Stereo signal
Bass Boost 10 levels. Increases the very low frequencies
Reset button Readjusts all settings to their default values
18.2
Play Mode Settings
If you would like the AV400 to play through an entire folder
of songs, play songs at random (shuffle), or any of the other
playing options, you can set these parameters in the PlayMode
settings. Click on the LEFT function button Setup while listening
to music or via the main menu item Setup and then choose
Playmode.
Parameter Description
Folder Play all tracks in the current directory or current album
All Play all tracks on the AV400
Single Play a single track then stop
Queue While the current song is playing, click on Navigate, find the
next song you want to play, then click Play. This is your queued
song. You can only queue one song at a time. See the Playlist
section to prepare multiple songs to play. Once the current
track is finished playing, your queued track will be played. If
you do not queue another track at this time, the AV400 will play
the next song in the directory.
Scan Each track in the directory is played for 15 seconds. This allows
a quick sample of each song. If you want to play the whole
song, click on the Play button during those first 15 seconds.
The AV400 will then revert to single directory mode and play
the rest of the songs in the directory without scanning.