ARCHOS AV420 - Manual (Page 49)

49
15
PHOTO - Viewing Photos
The AV400 series support the viewing of JPEG (.jpg) and
Bitmap (.bmp) image formats. Progressive JPEG images are
not supported. The AV400 will resize the image to fit on
the built-in screen or on a television screen if you choose
the television output. The yellow bar above the list of files
indicates that you are in the ‘Photo Only’ mode, meaning that only files of
type JPEG or BMP will be visible in the directory. The three images on the
right are thumbnail sized pictures
of the highlighted file (center) and
the picture just before and just
after the highlighted file.
If you are viewing photos on a
television, it is recommended that
you set the
Image Display setting
to Progressive to eliminate any
possible screen flicker. You will
find this in the menu
Setup >
Display .
15.1
Viewing Photos
When you click Enter  on a highlighted image file, the AV400 will display
the image in the carrousel, either alone, within a group of 4 images, or
within a group of 9 images. A red rectangle will surround the selected
photo. Click on Enter  again to display the image in full screen. Once it
is displayed as a full screen image, you can rotate it, magnify it, or set it
as the AV400 screen background (Wallpaper).
1 x 1 image 2 x 2 images 3 x 3 images