Acer Altos G700 series - Manual (Page 28)

2 System setup 18
Connecting peripherals
The system unit, keyboard, mouse, and monitor constitute the basic
system. Before connecting any other peripherals, connect these basic
peripherals first to test if the system is running properly. Instructions
on how to connect a printer is also described here, refer to page 21.
Note: The illustrations shown in this section show the Altos G701
server chassis.
Connecting the PS/2 keyboard
Plug the keyboard cable into the PS/2 keyboard port (purple
port) located on the rear panel of the server.
AA G701 - EN.book Page 18 Tuesday, February 25, 2003 5:19 PM