Removing the side panel – Acer Altos G700 series User Manual
Page 44
Advertising
3 Upgrading the system
34
Note: The illustration below shows the Altos G701 server chassis.
Removing the side panel
1
Turn off the system and all the peripherals connected to it.
2
Unplug all cables from the power outlets.
3
Place the system unit on a flat, stable surface.
4
Remove the front bezel.
Refer to the preceding section for detailed instructions.
5
Loosen the three thumbscrews located at the end of the left panel
closest to the front panel (1). Keep them for later use.
AA G701 - EN.book Page 34 Tuesday, February 25, 2003 5:19 PM
Advertising
This manual is related to the following products: