Installing a hard disk into the hot-swappable cage, Hard disk carrier – Acer Altos G700 series User Manual
Page 48
Advertising
3 Upgrading the system
38
b
SCSI drive power cable
c
SCSI drive fault LED cable
5
Pull out the cage from the chassis.
Installing a hard disk into the hot-swappable cage
hard disk carrier
Note: You need not remove the hot-swappable cage from the
chassis to install a hard disk into the cage’s hard disk carrier.
1
Press your finger to the SCSI drive release lever (1), then pull out
the hard disk carrier from the cage (2).
AA G701 - EN.book Page 38 Tuesday, February 25, 2003 5:19 PM
Advertising
This manual is related to the following products: