Acer Altos G700 series - Manual (Page 57)

47
To install a CPU with heatsink
If only one CPU is to be installed, it must be installed in the CPU 1
socket; if such is the case, the CPU 2 socket no longer requires a
termination module.
1 Observe the ESD precautions and pre-installation procedures
described on page 31.
2 Locate the CPU socket on the mainboard.
3 Align the CPU to its socket, making sure that pin 1 (indicated by
the notched corner) of the CPU connects to hole 1 of the socket
(on the bottom right corner).
4 To install the CPU to its socket, follow the steps below:
(1) Insert the CPU into the socket.
(2) Press down the retainer lever to lock the CPU in place.
5 Observe the post-installation instructions described on page 32.
AA G701 - EN.book Page 47 Tuesday, February 25, 2003 5:19 PM