Acer Altos G700 series - Manual (Page 49)

39
2 Remove the four screws to open the hard disk carrier. Keep the
screws for later use.
3 When applicable, pull out any previously installed hard disk.
4 Install a hard disk on the hard disk carrier then secure it with the
four screws you have removed earlier.
5 Insert the hard disk carrier into the cage with the lever still
extended.
6 Push the lever back until it clicks into place. Make sure that the
drive is properly inserted before closing the lever.
AA G701 - EN.book Page 39 Tuesday, February 25, 2003 5:19 PM