Teledyne LeCroy WaveExpert series Automation Manual - Manual (Page 216)

Chapter Four Control Reference
Horizontal coordinate of center of cut or slice from the persistence map (in horizontal units)
VerCutCenter
From -1.79769e+308 to 1.79769e+308 step 0
Double
Range
Description
Horizontal coordinate of center of cut or slice from the persistence map (in horizontal units)
VerCutWidth
From -1.79769e+308 to 1.79769e+308 step 0
Double
Range
Description
Specifies either a " vertical" cut direction or "horizontal" cut direction producing a histogram with
the same horizontal coordinates as the chosen direction.
CutDirection Enum
Description
Values
Horizontal
Vertical
Clear any accumulated result data. Useful for example to restart an average, or parameter statistics.
ClearSweeps Action
Description
Center the slice about the center of the axis, Vertical or Horizontal, depending upon the CutDirection
Setting.
CenterCursor Action
Description
RESCALE
app.Math.Fx.OperatorYSetup (Operator = "Rescale")
Linearly transform the vertical values of a waveform.
Adder Double
916435 RevA 4-12