Teledyne LeCroy WaveExpert series Automation Manual - Manual (Page 258)

A PPENDIX - A DCOM Setup
CONFIGURING DCOM CONNECTIVITY
The following items must be known and considered when creating DCOM connections from PC’s to LeCroy
oscilloscope:
•
The Operating System running on both the PC and Oscilloscope
• The level of visibility on an NT domain (if PC and Oscilloscope are even running on the same domain)
• Users must have administrative rights for both PC and Oscilloscope network locations
Note: Be sure to look for your particular Operating System based instructions from Windows XP or Vista, Windows 2000, and Windows
Embedded
.
There are 3 steps in the process of configuring a DCOM connection:
A.
Prepare the PC
B.
Prepare the oscilloscope
C.
Test the connection
The following sections describe how to configure the PC and the oscilloscope for several operating systems. Be
sure to reference the appropriate section for your OS.
A-1
916435 RevA