Teledyne LeCroy SierraNet M408 User Manual Ver.1.40 - Manual (Page 34)

Teledyne LeCroy Connecting Via USB
32 SierraNet M408 User Manual
1.6.1 Update Device
The Update Sierra Device command allows you to update the programmable components
(firmware and BusEngine) on a SierraNet M408 Analyzer whose current version is
incorrect. Please update the firmware using a USB connection to use the FC protocol over
Ethernet.
1. Click Setup > Device Management > Update Device to display the Update Device
dialog.
Figure 1.24: Device Setup Dialog with a Bad Device Status
Devices whose version is correct have an OK status in a green box. 
A device whose version is incorrect has a BAD status in a red box.
Note:
You can click the ellipses (...) at the end of a file path and name to display an Open dialog, in
which you can browse for files.
2. Click the checkbox to the left of a device with BAD status, then click
Update Selected to start the update process that will make the Analyzer version
correct.
Figure 1.25: Device Setup Dialog Beginning to Update Status of a Device