Teledyne LeCroy Summit T3-16 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 105)

Summit T3‐16 PCI Express Multi‐Lane Protocol Analyzer User Manual 93
Counter Teledyne LeCroy
Figure 5.43: Global and Sequence State Counters
As shown in Figure 5.43 there is a Global Counter 1, set to the value of 2 on channel up
displayed in green in the Global State and there are two counter 1s, set to the value of 2,
one counting upstream and the other counting downstream displayed in pink in the
Sequence State.
5.22.1 How to Set a Counter
Counters are events and you can add a counter to the Global State or the Sequence State
as an event by doing the following:
Right‐click in the blue space in the Global or Sequence State and New Event > Counter >
UpStream or DownStream. See
Figure 5.44 on page 94 .