Teledyne LeCroy Summit T3-16 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 112)

Teledyne LeCroy Channel
100 Summit T3‐16 PCI Express Multi‐Lane Protocol Analyzer User Manual
Figure 5.49: Setting the Timer Values
4. Click on the Actions tab and set the External and Internal Triggering, Sequencing
and Filtering options. You can label the timer.
5.23.4 Deleting a Timer
To delete a Timer
1. Right‐click on the Timer.
2. Select Delete This Event. The Timer will disappear from the event.
5.24 Channel
Every event has two channels, one upstream and the other downstream. You can use
both channels with any event. The channels are independent of each other. If both
channels are selected it is valid but no action occurs, and thus no timer and counter is
created.
Figure 5.50 shows three events in the Global State, the first event is on Channel
Up and the 3rd event is on Channel Down.
Figure 5.50: Events with Channels