Teledyne LeCroy Summit T3-16 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 66)

Teledyne LeCroy Recording Options‐General Tab
54 Summit T3‐16 PCI Express Multi‐Lane Protocol Analyzer User Manual
5.3 Recording Options-General Tab
This section describes the General Tab recording options.
Figure 5.1: Summit T3-16 in Recording Options
Note: Please refer to the figure callout numbers in each of the sections below to co‐relate to Figure 5.1
shown above. For instance, for Simple and Advanced Mode, see Figure 5.1: 1B.
5.4 Simple and Advanced Mode
The recording options can be defined in Simple or Advanced modes. The Simple
Recording and Advanced Recording options are the same in functionality, only the
interface displayed is different. The Simple Mode allows quick access to commonly used
options. The recording options are the same in both modes (See
Figure 5.1 on page 54 :
1B).
Clicking on the Switch to Simple Mode toggles you between Simple and Advanced Mode.
1
2
3
1C 1D 1E 1F
1B
1A
2C
2B
2A
2G 2F 2E
3A
3B
3C
3E
3G
3J
2D
3H
3F
3D
3I