Teledyne LeCroy Summit Z3-16 PCI Express Multi-lane Exerciser User Manual - Manual (Page 30)

Teledyne LeCroy Setting Up the Summit Z3‐16 Exerciser
30 Summit Z3‐16 PCI Express Multi‐Lane Exerciser User Manual
There are two ways the Summit Z3‐16 Exerciser can be connected:
 Directly inserted into a slot in the host machine
 Connected via the PCI Express Test Platform 16x2.5GT/s / 16x5.0GT/s /
16x8.0GT/s
3.5.1 Connecting the Summit Z3-16 Exerciser Directly to a Host Machine
The Summit Z3‐16 Exerciser is inserted into a slot in the host machine.
Connect the AC adapter to the Exerciser. The Summit Z3‐16 Exerciser powers on. Do not
turn the host machine on till the Exerciser initializes which could take a few minutes.
3.5.2 Connecting the Summit Z3-16 Exerciser to the PCI Express Test Platform
16x2.5GT/s / 16x5.0GT/s / 16x8.0GT/s
The PCI Express Test Platform allows the Summit Z3‐16 Exerciser to act as a host
emulation system. The PCI Express Test Platform enclosure has two slots on top to
accommodate the Summit Z3‐16 Exerciser and a DUT (Device Under Test).
Figure 3.11: Connecting the Summit Z3-16 Exerciser via the PCI Express Test Platform
16x2.5GT/s / 16x5.0GT/s / 16x8.0GT/s
Hardware enclosure with a slot on top for accommodating a PCI Express card.