Teledyne LeCroy Summit Z3-16 PCI Express Multi-lane Exerciser User Manual - Manual (Page 87)

Summit Z3‐16 PCI Express Multi‐Lane Exerciser User Manual 87
Expansion ROM Setup Teledyne LeCroy
Figure 6.7: Setup
4. Save the configuration space once all the required changes to the configuration
space are entered.
5. Follow the usual sequence to load configuration space file to the Z3 Trainer Summit
which is writing the configuration space.
Figure 6.8: Write Address Space
6. Click on the icon to write the address space.
7. If there is a predefined file for the expansion rom contents select the Exp ROM
check box.
8. Enter the path to the file.
9. Enter any offset or size required.