Actiontec electronic GT701A - Manual (Page 34)

31
Performing a
Basic Setup
This chapter is a guide through a basic configuration setup of the Modem for users
who did NOT use the Actiontec Installation Buddy® to set up the Modem. The
basic setup includes instructions on how to connect the Modem to the
ISP and
change the user name and password.
To complete a basic setup, the user will need information provided by the
ISP and
access the Modem’s Web Configurator. This information from the ISP is sometimes
contained in a welcome letter or ISP worksheet. If this document is not available,
contact the ISP immediately and request one.
Basic Setup
☞
Note: If you already set up the Modem using the Installation
Buddy (as described in Chapter 2, “Setting Up the Modem”), the
settings described in this section have already been configured.
Please continue to chapter 4, “Using Advanced Setup,” to configure
the advanced settings of the Modem.
1. Open a Web browser. In the “Address” text box, type
http://192.168.0.1
then press Enter on the keyboard.
2. The Web Configurator’s “Main Menu” screen appears. Select Setup/
Configuration.
3