Actiontec electronic GT701A - Manual (Page 86)

83
Setting Up Static IP
on the Computer
To communicate with the Modem from a computer on the network (to use the
Web Configuration Utility, for example), the user may have to switch the IP
address settings from
DHCP -enabled to static IP , so that the computer and the
Modem are on the same network subnet.
To set up static IP on a computer, select the operating system and follow the
instructions.
☞
Note: The following procedures are based on the Modem’s factory
default IP address. If the Modem’s IP address has been changed,
enter the new IP address when instructed to enter an IP address.
Windows 98 SE
1. From the desktop, click on the Start button in the lower left corner.
2. From the menu that appears, select Settings.
b