Actiontec electronic GT701A - Manual (Page 40)

36
Actiontec USB/Ethernet DSL Modem User Manual
37
Chapter 4 Using Advanced Setup
After selecting a connection type, click Next to continue configuring the connection.
Transparent Bridging
Select this option to use the Modem as a transparent bridge. This option should
only be used if the Modem is being used as a modem to connect
your computer to
the Internet via a DSL connection. When the Modem is being used as a transparent
bridge, it does not provide any firewall security.
Obtain an IP Address through PPPoE or PPPoA
Select one of these options to allow the Modem to use the Point-to-Point over
Ethernet (
PPPoE ) or Point-to-Point over ATM ( PPPoA ) protocol.
“Broadband Connection via PPPoE” screen: