Vanguard ATRT-01 S2 - Manual (Page 24)

ATRT-01 S2, ATRT-01B S2, AND ATRT-01D S2 USER’S MANUAL REV 2
20
3.4 Setting the Date and Time
To set the date and time:
a. Start from the “START-UP” menu:
Press the [2] key (SETUP).
b. The following screen will be displayed:
Press the [2] key (SET TIME)
c. The following screen will be displayed:
Type in the date and time using the alpha-numeric keypad. When the complete date
and time has been entered, you will be immediately returned to the “START-UP” menu.
ENTER
MM-DD-YY HH:MM:SS
_
1.SET TIME
2.SET TEST VOLTAGE
3.COMPUTER CONTROL
1.TEST XFMR 06/02/10
2.SETUP 15:33:10
3.CALCULATOR