Vanguard Tri-Phase - Manual (Page 106)

TRI-PHASE OPERATING™ INSTRUCTIONS
106
17.16 Erase Test Plan Menu
ERASE TEST PLAN
1.ERASE SINGLE PLAN .
2.ERASE ALL PLANS
Figure 69.0 Erase Test Plan Menu
a. Description: Allows the operator to erase a single test plan, or erase all test plans from
FLASH EEPROM.
b. Origin: From the “Test Plan Menu” (Figure 60.0) select menu option 5.
c. Action Options: Press key number 1 or push down on the Control Knob to select the
“Erase Single Plan” option. Press key number 2 to select “Erase All Plans” option. The
“Erase All Plans” option may be selected by turning the Control Knob and pushing down
the Control Knob after number 2 is selected.
d. Action To Perform: Select menu option 1 for this example.