Vanguard Tri-Phase - Manual (Page 123)

TRI-PHASE OPERATING™ INSTRUCTIONS
123
25.3 Copy Single Record To Thumb Drive Status Displays
ENTER RECORD NUMBER
TO COPY TO FLASH DRV
NUMBER:
REC_## SAVED TO
THUMB DRIVE
Figure 79.0 Copy Single Record To Thumb Drive Status Displays
a. Description: Allows the operator to copy a single record to thumb drive.
b. Origin: From the “Copy Record To Thumb Drive Test Menu” (Figure 78.0) select menu
option 1.
c. Action Options: Enter the record number to copy to the thumb drive using key numbers 0
through 9. Press the “CLEAR” key to enter another number. Press the “ENTER” key or
push down the Control Knob to confirm.
d. Status Displays: The top status display is for entering the record number. The bottom
status display confirms that the record has been saved to thumb drive.