Vanguard Tri-Phase - Manual (Page 126)

TRI-PHASE OPERATING™ INSTRUCTIONS
126
25.6 Copy Test Plan To Thumb Drive Status Display
ENTER TP NUMBER
TO COPY TO FLASH DRV
TP NUMBER:
Figure 82.0 Copy Test Plan To Thumb Drive Status Display
a. Description: Allows the operator to copy a test plan from internal memory to the thumb
drive.
b. Origin: This menu is displayed after the operator selects menu option 7 (“Copy To Thumb
Drive”) from the “Test Plan With Thumb Drive Menu” (Figure 81.0).
c. Action Options: Enter the test plan to copy from the thumb drive using key numbers 0
through 9. Press the “CLEAR” key to enter another number. Press the “ENTER” key or
push down the Control Knob to confirm.