Vanguard EZCT-S2 User Manual
Page 16
EZCT S2 USER’S MANUAL
REV 3
12
d. The following screen will be displayed:
Type the station name using the alpha-numeric keypad and then press the
[ENTER]
key.
e. The following screen will be displayed:
Type the circuit information using the alpha-numeric keypad and then press the
[ENTER]
key.
f. The following screen will be displayed:
Type the manufacturer name using the alpha-numeric keypad and then press the
[ENTER]
key.
g. The following screen will be displayed:
Type the model information using the alpha-numeric keypad and then press the
[ENTER]
key.
h. The following screen will be displayed:
Type the serial number using the alpha-numeric keypad and then press the
[ENTER]
key.
SERIAL NUMBER:
↑/↓ TO POSITION
“ENTER” TO ACCEPT
MODEL:
↑/↓ TO POSITION
“ENTER” TO ACCEPT
MANUFACTURER:
↑/↓ TO POSITION
“ENTER” TO ACCEPT
CIRCUIT:
↑/↓ TO POSITION
“ENTER” TO ACCEPT
STATION:
↑/↓ TO POSITION
“ENTER” TO ACCEPT