Vanguard EZCT-S2 - Manual (Page 45)

REV 3 EZCT S2 USER’S MANUAL
41
Press the
[START]
key to begin the test.
f. The EZCT S2 will start performing the test per the test plan parameters. When the test
has finished, the following screen will be displayed:
Press any key to continue.
g. The following screen will be displayed:
Press the [1] key (YES) if you would like to print the test results.
Press the
[2]
key (NO) if you do not want to print the test results.
h. The following screen will be displayed:
Press the [1] key (YES) to keep the test results.
i. The following screen will be displayed:
Press any key to continue.
j. The following screen will be displayed:
SAVE THIS RECORD?
1.YES
2.NO
TEST 2 SAVED
KEEP THIS TEST?
1.YES
2.NO
PRINT TEST RESULTS?
1.YES
2.NO
ANY KEY TO CONTINUE
Vx=77.6 Vh=0.3876
I=0.0522 RAT=+200.08
TEST 1 PARAMETERS:
1500V 1.0A X1-X2
“START” TO BEGIN