Vanguard EZCT-S2 - Manual (Page 22)

EZCT S2 USER’S MANUAL REV 3
18
n. The following screen will be displayed:
Press any key to continue.
o. The following screen will be displayed:
Press the [2] key (NO).
p. The following screen will be displayed:
Press the [1] key (YES) to save the record.
The following screen will be displayed momentarily:
q. The following confirmation screen will then be displayed:
NOTE
The test record number is automatically assigned to each test record stored in
the EZCT S2’s Flash EEPROM.
Press any key to return to the “START-UP” menu.
RECORD NUMBER 1
HAS BEEN SAVED!
SAVING RECORD...
PLEASE WAIT...
SAVE THIS RECORD?
1. YES
2. NO
RUN ANOTHER TEST?
1. YES
2. NO
TEST 1 SAVED