ZOLL M Series CCT Defibrillator Rev C - Manual (Page 9)

ZOLL M Series Temperature 3
Reading the Display
If the temperature probe and cable are properly attached, the temperature values display immediately
(see Fig. 1 and Fig. 2). When reading the temperature values on the display, keep in mind that the
location of the probe on the patient can influence temperature measurements.
The Temperature data display area cycles between Temperature Channel 1 (T1), Temperature Channel
2 (T2), and the difference between the two values ( T). The data display area contains the following
information:
• Temperature
• Alarm status
• Unit of measurement
NOTE Depending on the options included in your M Series, your front panel and display may slightly differ from
the illustrations in this insert.
Figure 1: M Series Front Panel with Temperature Option
∆
Temperature
Data Display
Area
Temperature
Connector