IEI Integration SPCIE-5100DX - Manual (Page 39)

SPCIE-5100DX PICMG 1.3 CPU Card
Page 25
CN Pinouts:
See Table 3-7
The digital input/output connector is managed through a Super I/O chip. The DIO
connector pins are user programmable.
Figure 3-6: DIO Connector Location
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 GND 2 VCC (+5V)
3 Output 3 4 Output 2
5 Output 1 6 Output 0
7 Input 3 8 Input 2
9 Input 1 10 Input 0
Table 3-7: DIO Connector Pinouts
3.2.6 Floppy Disk Connector (34-pin)
CN Label: FDD1
CN Type:
34-pin header (2x17)
CN Location:
See Figure 3-7
CN Pinouts:
See Table 3-8
The floppy disk connector is connected to a floppy disk drive.