IEI Integration SPCIE-5100DX - Manual (Page 62)

SPCIE-5100DX PICMG 1.3 CPU Card
Page 48
Figure 4-5: CPU 12V Power Connector
4.4.3 Cooling Kit Installation
Figure 4-6: IEI LGA771 Cooling Kit
Two IEI LGA771 CPU cooling kits (Figure 4-6) are shipped with the SPCIE-5100DX. The
cooling kit comprises a CPU heat sink and a cooling fan. To install the cooling kit, please
follow the steps below.
Step 1: Remove the four retention screws located near the LGA771 CPU sockets.
NOTE:
The SPCIE-5100DX has a SBC support bracket on the bottom and the
bracket is secured to the board with few retention screws. The SBC support
bracket is to support the CPU cooling fan and the SPCIE-5100DX. To
install the CPU cooling fan, the four retention screws near the CPU sockets
need to be removed.