IEI Integration SPCIE-5100DX - Manual (Page 74)

SPCIE-5100DX PICMG 1.3 CPU Card
Page 60
Figure 4-15: PS/2 Connector
4.7.4 Dual RS-232 Cable Connection
The dual RS-232 cable consists of two connectors attached to two independent cables.
Each cable is then attached to a D-sub 9 male connector that is mounted onto a bracket.
To install the dual RS-232 cable, please follow the steps below.
Step 1: Locate the connectors. The locations of the RS-232 connectors are shown in
Chapter 3.
Step 2: Insert the cable connectors. Insert one connector into each serial port box
headers. See Figure 4-16. A key on the front of the cable connectors ensures
the connector can only be installed in one direction.