7 usb cable (dual port), Figure 4-21: dual usb cable connection – IEI Integration SPCIE-5100DX User Manual
Page 79
SPCIE-5100DX PICMG 1.3 CPU Card
Page 65
4.7.7 USB Cable (Dual Port)
The SPCIE-5100DX is shipped with a dual port USB 2.0 cable. To connect the USB cable
connector, please follow the steps below.
Step 1:
Locate the connectors. The locations of the USB connectors are shown in
Chapter 3.
WARNING:
If the USB pins are not properly aligned, the USB device can burn out.
Step 2:
Align the connectors. The cable has two connectors. Correctly align pin 1on
each cable connector with pin 1 on the SPCIE-5100DX USB connector.
Step 3:
Insert the cable connectors. Once the cable connectors are properly aligned
with the USB connectors on the SPCIE-5100DX, connect the cable connectors
to the on-board connectors. See Figure 4-21.
Figure 4-21: Dual USB Cable Connection
Step 4:
Attach the bracket to the chassis. The USB 2.0 connectors are attached to a