IEI Integration SPCIE-5100DX - Manual (Page 46)

SPCIE-5100DX PICMG 1.3 CPU Card
Page 32
3.2.12 SATA Drive Connectors
CN Label:
SATA1, SATA2, SATA3, SATA4, SATA5 and SATA6
CN Type:
7-pin SATA drive connectors
CN Location:
See Figure 3-13
CN Pinouts:
See Table 3-14
The SATA drive connectors are each connected to a second generation SATA drive.
Second generation SATA drives transfer data at speeds as high as 3.0 Gb/s. The SATA
drives can be configured in a RAID configuration and support RAID 0, 1, 5 and 10.
Figure 3-13: SATA Drive Connector Locations
PIN NO. DESCRIPTION
1 GND
2 TX+
3 TX-
4 GND
5 RX-
6 RX+
7 GND
Table 3-14: SATA Drive Connector Pinouts