IEI Integration SPCIE-5100DX User Manual

Page 73

Advertising

Page 59

4-14.

Step 3:

Insert the cable connectors. Once the keyboard (mouse) cable connector is

properly aligned with the keyboard (mouse) connector on the SPCIE-5100DX,

connect the cable connector to the on-board connector. See Figure 4-14.

Figure 4-14: Keyboard and Mouse PS/2 Cable with Bracket

Step 4:

Connect the bracket to the chassis. The bracket has a retention screw hole at

the top. Properly insert the bracket into the chassis and secure the bracket to the

chassis with a retention screw passing through the retention screw hole. Please

see the chassis installation instructions for more details.

Step 5:

Connect the keyboard and mouse. Once the PS/2 connectors are connected to

the chassis, a keyboard and mouse can each be connected to one of the PS/2

connectors. See Figure 4-14.The keyboard PS/2 connector and mouse PS/2

connector are both marked. Please make sure the keyboard and mouse are

connected to the correct PS/2 connector.

Step 0:

Advertising