IEI Integration PCIE-Q350 v1.12 - Manual (Page 105)

PCIE-Q350 PICMG 1.3 CPU Card
Page 84
Figure 5-1: Intel® LGA775 Socket
To install a socket LGA775 CPU onto the PCIE-Q350, follow the steps below:
WARNING:
When handling the CPU, only hold it on the sides. DO NOT touch the
pins at the bottom of the CPU.
Step 1: Remove the protective cover. Remove the black protective cover by prying it
off the load plate. To remove the protective cover, locate the “REMOVE” sign
and use your fingernail to pry the protective cover off. See Figure 5-2.
Figure 5-2: Remove the CPU Socket Protective Shield
Step 2: Open the socket. Disengage the load lever by pressing the lever down and
slightly outward to clear the retention tab. Rotate the load lever to a fully open