IEI Integration PCIE-Q350 v1.12 - Manual (Page 118)

PCIE-Q350 PICMG 1.3 CPU Card
Page 97
Figure 5-11: Audio Kit Connection
Step 3: Connect the audio devices. Connect the speakers and the subwoofer to the
appropriate audio jack shown in Figure 5-11.
5.7.3 Dual RS-232 Cable Connection
The dual RS-232 cable consists of two connectors attached to two independent cables.
Each cable is then attached to a D-sub 9 male connector that is mounted onto a bracket.
To install the dual RS-232 cable, please follow the steps below.
Step 1: Locate the connectors. The locations of the RS-232 connectors are shown in
Chapter 3.
Step 2: Insert the cable connectors. Insert one connector into each serial port box
headers. See Figure 5-12. A key on the front of the cable connectors ensures
the connector can only be installed in one direction.