C.1 introduction, Note, C.2 dio connector pinouts – IEI Integration KINO-945GSE v1.10 User Manual
Page 177: Ntroduction, Onnector, Inouts
KINO-945GSE Motherboard
Page 161
C.1 Introduction
The DIO connector on the KINO-945GSE is interfaced to GPIO ports on the Super I/O
chipset. The DIO has both 4-bit digital inputs and 4-bit digital outputs. The digital inputs
and digital outputs are generally control signals that control the on/off circuit of external
devices or TTL devices. Data can be read or written to the selected address to enable the
DIO functions.
NOTE:
For further information, please refer to the datasheet for the Super I/O
chipset.
C.2 DIO Connector Pinouts
The following table describes how the DIO connector pins are connected to the Digital I/O
port.
Pin Description Super
I/O
Pin Super
I/O
Pin
Description
1 Ground
N/A
N/A
2 VCC
N/A
N/A
3
Output 3
24
General Purpose I/O 23
4
Output 2
25
General Purpose I/O 22
5
Output 1
26
General Purpose I/O 21
6
Output 0
27
General Purpose I/O 20
7
Input 3
16
General Purpose I/O 33
8
Input 2
17
General Purpose I/O 32
9
Input 1
18
General Purpose I/O 31
10
Input 0
19
General Purpose I/O 30
Table C-1: Digital I/O Connector Pinouts