IEI Integration KINO-945GSE v1.10 - Manual (Page 91)

KINO-945GSE Motherboard
Page 75
Figure 5-5: CF Card Setup Jumper Location
5.6.4 COM3 RS-232/422/485 Selection Jumper
Jumper Label: JP1
Jumper Type: 6-pin header
Jumper Settings: See Table 5-5
Jumper Location: See Figure 5-6
The RS-232/422/485 Serial Port Select jumper sets the communication protocol used by
COM3. The RS-232/422/485 Serial Port Select settings are shown in Table 5-5.
RS-232/422/485 Description
1-2 RS-232 Default
3-4 RS-422
5-6 RS-485
Table 5-5: COM3 RS-232/422/485 Selection Jumper Pinouts
The RS-232/422/485 Serial Port Selection jumper location is shown in Figure 5-6.