IEI Integration KINO-9453 v2.10 - Manual (Page 160)

KINO-9453 Mini-ITX Motherboard
Page 143
7.1 Available Software Drivers
NOTE:
The content of the CD may vary throughout the life cycle of the product
and is subject to change without prior notice. You may visit the IEI
website or contact technical support for the latest updates.
The following drivers can be installed on the system.
Chipset driver
VGA driver
LAN driver
Audio driver
Installation instructions are given below.
7.2 Driver CD Auto-run
All the drivers for the KINO-9453 are on the CD that came with the system. To install the
drivers, please follow the steps below.
Step 1: Insert the CD into a CD drive connected to the system.
Step 2: The starts up automatically
Step 3: Select KINO-9453 from the initial menu.
Step 4: A new screen with a list of available drivers appears (Figure 7-1).