IEI Integration KINO-9453 v2.10 - Manual (Page 81)

KINO-9453 Mini-ITX Motherboard
Page 64
LVDS screen resolution selection JP2 8-pin header
RS-422 termination resister JP8 2-pin header
RS-485 termination resister JP9 2-pin header
Table 5-1: Jumpers
5.4.1 AT/ATX Power Select Jumper Settings
Jumper Label: JP5 and JP6
Jumper Type: 2-pin header
Jumper Settings: See Table 5-2
Jumper Location: See Figure 5-8
The AT/ATX Power Select jumper specifies the systems power mode as AT or ATX.
AT/ATX Power Select jumper settings are shown in Table 5-2.
JP5 Description
Short Use ATX power Default
Open Use AT power
JP6 Description
Short Use AT power
Open Use ATX power Default
Table 5-2: AT/ATX Power Select Jumper Settings
The location of the AT/ATX Power Select jumper is shown in Figure 5-8 below.