4 rs-422 or rs-486 termination resister, See figure 5-10, Figure 5-10 – IEI Integration KINO-9453 v2.10 User Manual
Page 85
Advertising
KINO-9453 Mini-ITX Motherboard
Page 68
Figure 5-10: COM 3 Function Select Jumper Locations
5.4.4 RS-422 or RS-486 Termination Resister
Jumper Label:
JP8 and JP9
Jumper Type:
2-pin header
Jumper Settings:
Jumper Location:
The JP8 sets the RS-422 Termination Resister while JP9 sets the RS-485 Termination
Resister. The RS-422 and RS-485 Termination Resister settings are shown in Table 5-5
and Table 5-6.
JP8
Description
Open Normal
Operation
Default
Short
Termination Resister Setting
Table 5-5: RS-422 Termination Resister Jumper Settings
Advertising