IEI Integration KINO-9453 v2.10 - Manual (Page 95)

KINO-9453 Mini-ITX Motherboard
Page 78
5.7 External Peripheral Interface Connection
The following external peripheral devices can be connected to the external peripheral
interface connectors.
Audio devices
RJ-45 Ethernet cable
USB devices
VGA monitors
DVI port devices
Serial port devices
Mouse and keyboard
To install these devices, connect the corresponding cable connector from the actual
device to the corresponding KINO-9453 external peripheral interface connector making
sure the pins are properly aligned.
5.7.1 Audio Connection
Audio signals are interfaced through two phone jack connections. The red phone jack is
for Line Out and green is for MIC In. Follow the steps below to connect audio devices to
the KINO-9453.
Step 1: Locate the audio phone jacks. The location of the audio phone jacks are
shown in Chapter 3.
Step 2: Insert audio phone jack plugs. Insert audio phone jack plugs into the audio
phone jacks on the external peripheral interface. See Figure 5-18.